Oven CIP Skid

commercial oven CIP skid

Oven CIP Skid

Oven Cleaning Simplified

fusion cook

Oven CIP Skid

Description

Our innovative and uniquely designed CIP Skid is a high capacity clean-in-place tank and pumping system designed to efficiently and effectively clean and sanitize a Fusion Tech Oven.

Customer supplied fresh water fills the CIP Skid tank through the fresh water inlet. Sensors located at the top and bottom of the tank read water pressure, temperature, and level, and safety switches shut the system down if the water level gets too high or too low, respectively.

When a Clean Recipe is run on the required FT-3000 Oven Controller, water is pumped from the CIP Skid tank to the mixing pipe, where cleaning or sanitation chemical agents are metered into the fresh water stream to obtain the precise
mixture you require.

Reduce cleaning and sanitation time, optimize the cleaning process, and save money with the Oven CIP Skid!

Benefits
  • Ensures correct cleaning and sanitation chemical doses every time
  • Chemicals are kept separate from clean water
  • High and low water sensors
  • Integrates into FT-3000 Controller
  • Holds 600 gallons of fresh water
  • Read pressure and temperature on oven control panel
  • Easily connect cleaning and sanitation chemical containers
Features

The Fusion Tech Oven CIP Skid comes equipped with a number of standard features designed to for durability, sanitation, and safety.

Construction

  • Stainless Steel Type 304 Construction
  • Chemical Container Shelf
  • Temperature, Pressure, and Level Switches
  • Tank Holds 600 Gallons of Fresh Water
  • Steam Sparging Port to Increase Temperature Range
  • Electromagnetic Flow Meter to Measure Water Flow

Sanitation

  • Easy to Clean
  • Exceeds all AMI Sanitary Equipment Design Requirements
Catalog

Download our Fusion Cook Catalog to learn more about our CIP Skid.

Download the Fusion Cook catalog to learn more about our food processing oven accessories.

Standard Sizes

Model # Height (Top of Tank) Height (Overall) Width Length Electrical Main Pump Tank Capacity
A-13545 91.34″ 121.78″ 54.58″ 96.20″ 480v/60Hz/15FLA/3-Phase 3hp/3600rpm 600

The Oven CIP Skid can be custom designed to meet the footprint and options you need.

Oven CIP Skid Features

The Fusion Tech Oven CIP Skid comes with a number of design, sanitation, and safety features that add value to your facility and processing operation.

Click on each number to learn more about the Oven CIP Skid.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Oven CIP Skid
1

Sampling Port

Easily take mixture samplings of solution.

2

Conductivity Sensor

Measures conductivity of solution which controls the dosing pump volume discharge.

3

Helical Static Meter

Mixes the fresh water and chemicals.

4

High Level Switch

Measures level of water in tank and shuts off incoming water when activated.

5

Tacima Metering Pumps

Pumps cleaning and sanitation chemical into the line to be mixed with fresh water.

6

Electromagnetic Flow Meter

Measures water flow in the piping and displays on the oven controller.

7

Temperature Sensor

Measures temperature in the tank and the piping and displays on the oven controller. Can be used to activate steam sparging line to maintain desired temperature.

8

Pressure Sensors

Measures pressure (elevation of the water) in the tank and the piping and displays on the oven controller.

9

Chemical Container Shelf

Holds cleaning and sanitation chemical containers while connected to pumps.

10

Main Pump

High powered pump moves water through the system and pushes it into the Fusion Tech Oven CIP system.

11

Low Level Switch

Measures level of water in tank and shuts off system when not enough water is present.

12

Temperature Sensor

Measures temperature in the tank and the piping and displays on the oven controller. Can be used to activate steam sparging line to maintain desired temperature.

13

Pressure Sensor

Measures pressure (elevation of the water) in the tank and the piping and displays on the oven controller.

14

CIP Skid Tank

Tank holds 600 gallons of fresh water to pump through system.

15

Steam Sparging Port (Back Side)

Add steam to the holding tank to increase to the desired temperature range.