Steam Ovens

Food Processing Ovens

All About the Airflow

Steam Ovens

Our line of industrial steam ovens come equipped with a cooking system that injects large volumes of live steam into the cabinet to cook a variety of products, such as cook-in-bag, plastic casing, meal pouches, and exposed products.

Live steam cooking retains product moisture during the cook cycle and does not require airflow, eliminating the additional equipment found on a smokehouse or dehydrator. This makes our steam ovens the economical choice for cooking your product.

Consistent product yields and texture are possible in a Fusion Tech steam oven.

Download the Fusion Cook catalog to learn more about our food processing ovens.

Download Catalog

Retain Moisture

Our live steam cook system helps retain more moisture in your product during the cook cycle.

Increase Product Consistency

Product cooks evenly throughout your truck, giving you greater consistency.

Easy to Clean

Our steam ovens are equipped with a number of features making them easy to clean.

Steam Oven Features

Standard Features

Standard Features

Stainless Steel 304 construction with interior seams fully welded (no gaskets)
Walls, roof, and doors fully insulated with Rockwool Insulation (1,100° rating)
Walls and roof have stainless steel structural tube and angle design
Heavy duty stainless steel diamond floor plate
480 volt power supply standard
Single product probe
Psychrometer pan in return airflow for accurate temperature and humidity readings
Air bladder door seals (pneumatic)
Indu iMax 1000 controller featuring color touchscreen that can hold multiple recipes, offline monitoring, chart recording, and documentation storage capabilities for HACCP standard

Heating Source

Fusion Tech ovens can come with your option of heating sources.

Wet Heating Sources

Steam Cook

Power Supply

Fusion Tech ovens can include the following power supplies:

208 volt power supply
230/240 volt power supply
575 volt power supply

Our Steam Ovens can be outfitted with 110 volt power supply.

Oven Doors

Doors fully insulated with Rockwool Insulation (1,100° rating)
Add an optional Pass-Through door on the oven
An innovative vacuum system on the inflatable door seal allows the seal to deflate much quicker than a typical system as well as reduce the potential of tearing by retracting the seal into the protective door channel.

Frame & Construction (Light Blue Dots)

Fusion Tech ovens feature the best in framing and construction:

Stainless Steel 304 construction with interior seams fully TIG welded (no gaskets)
Walls, roof, and doors fully insulated with Rockwool Insulation (1,100° rating)
Walls and roof have stainless steel structural tube and angle design
Heavy duty stainless steel diamond floor plate
Sanitary design construction

Cleaning & Sanitation (Dark Blue Dots)

Fusion Tech Ovens are designed with sanitation in mind.

Product shower piping and sanitary spray balls located in the main ducts and oven housing provide 360 degree cleaning — something you won’t find in ovens with the pig-tale spray nozzle. Our built in cleaning system cleans all areas around the fan cabinet, supply ducting, return areas, and more.

Sanitary welds and no metal-on-metal contact round out the easy-to-clean features of a Fusion Tech oven.

Download the Oven Sanitation Brochure

Maintenance Friendly (Green Dots)

Fusion Tech Ovens include the following features for ease of maintenance:

Access ports located above oven dampers for:
- Easy damper tuning, if ever needed
- Access to the air/water atomization that produces humidity
Psychrometer pan located in return duct with access from a return duct port that makes replacing the wet bulb easy
Steam ovens feature a steam coil drawer in the return duct, making it easy to access and pull out the steam coil for maintenance or future replacement
Sanitary spray balls are easily removed for cleaning if they ever get clogged

Customize Your Oven

Options

Interior Drain
Exterior Trench or Area Drain
Automatic or Manual CIP Piping
Prouct Shower
Pass-Through Door
Additional Product Probes (standard is 1 probe)
Stack Lighting & Alarms
Handrail on Top of Oven
Access Ladder
Exhaust Stacks

Electrical

Fusion Tech ovens come standard with high / low voltage, air control valves, HMI in one enclosure located on the side of the oven. Other options include:

Remote HMI (attached to oven, but not in control panel)
Remote HMI (not attached to oven)
Control Panel on Top of Oven (requires AC Unit)
Alternate Location for Control Panel (not attached to oven)
Slope Top Box

UL Certification

Fusion Tech oven electrical panels can be UL certified at the customer’s request.

CIP Skid

Our innovative and uniquely designed CIP Skid is a high capacity clean-in-place tank and pumping system designed to efficiently and effectively clean and sanitize a Fusion Tech Oven.

Learn More

Green Dots = Maintenance Features
Dark Blue Dots = Cleaning & Sanitation Features
Light Blue Dots = Construction

Download the Fusion Cook catalog to learn more about our food processing ovens.

Download Catalog

Control Panels

Fusion Tech Ovens come with three controller options. You can learn more about our controllers to the right.

iMax 1000 Controller

FT-3000 Controller

Add On Feature

CIP Skid

A high capacity clean-in-place tank and pumping system designed to efficiently and effectively clean and sanitize a Fusion Tech Oven.

Oven CIP Skid

I’ve been in the meat industry for 33 years and have used all kinds of equipment, but now I’m a Fusion Tech customer for life. I have used Enviro-Pak horizontal smokehouses, Alkar smokehouses, as well as others, and nothing compares to the Cove Smokehouses. I have an older 2-Truck Alkar smokehouse that was retrofitted with the Fusion Tech Total-Flow-Control (TFC) airflow system. With the TFC system, now I can use that smokehouse for all of my jerky products. The TFC allows me to concentrate the airflow virtually anywhere I want in the oven, so it allows me to put more capacity on a rack and still maintain excellent consistency. I basically get two smokehouses in one with the Fusion Tech smokehouse, a horizontal and a vertical smokehouse. The Fusion Tech oven gives me better consistency and 20% more capacity per rack.

Mike FullardJust Mike’s Jerky

1 2 3 4 5 6 7

An Oven for Your Product.

Whatever your product, there is a Fusion Tech Oven — smokehouse, dehydrator, steam oven — to meet your needs.

Easy to Use.

Our controls offer robust functions in a simplistic touch screen interface with instruction prompts.

Oven & Accessories in One.

Fusion Tech provides a line of smokehouse accessories, including carts, racks, trees, screens, and more.

Increased Capacity. Same Size.

Our ovens are capable of consistently cooking more product in the same oven size as the leading competitor —
giving you more product in less space.

Specialize in Large Ovens.

We specialize in constructing large ovens, but will build down to a 1×2 truck.

Continued Support.

Providing our customers with quality equipment and unsurpassed customer service has been Fusion Tech’s goal since opening our doors over a decade ago.

Durable Build.

Fusion Tech Ovens are constructed of high grade stainless steel and designed to last years of extensive use.